2000 Toyota Tundra Ignition Key Cylinder

How to video on Toyota Tundra Key lock cylinder removal.

2000 toyota tundra ignition key cylinder. This time the relay didnt fix it. Put the key in the ignition and can move it from the Lock position to the ACC position. Insert bent wire into hole in ignition lock cylinder housing to depress the pin that retains the lock cylinder.

Insert ignition key and turn to the accessory position. Align the locking cam with the hole in the ignition switch and insert the switch into the lock housing. Slide the cylinder into the lock housing until the stop tab engages the hole in the lock.

Toyota Tundra 2 Doors 2000 Ignition Lock Cylinder by Beck Arnley. Parts fit for the following vehicle. Ignition lock cylinders activate the ignition switch to help power up the accessory circuit fuel pump and computer system when starting the vehicle.

With automatic transmission 2 door model. Just be prepared to prove ownership to Toyota in some way. Installation is reverse of the above.

Locksmart Ignition Lock Cylinder LC63010. If your vehicle has an ignition. The light-up bezel around the ignition itself had to be slipped off and with the key turned to accessory a pin on the bottom of the lock cylinder can be depressed and the ignition removed.

When I try to move the key to the ON position it stops just before getting to the ON position. Ignition Lock Cylinder - Repair or Replace If your ignition key doesnt turn or it turns much farther than it used to the problem could be with your ignition lock cylinder. I am moderately mechanically inclined at least I could work on cars in the 70s and 80s somewhat.